Page 370 - Catalogue-UK-ED25

CONTROLLERS Do this

WHICH ONE AND WHAT POWER SUPPLY? for each
zone

A controller is the device that receives a signal from your remote or DMX control system and then makes the LEDs match the colour you have set.
You need one controller in each zone to adjust all of the LEDs in that zone.

You will have already decided how many zones you are going to have. If you are controlling eight or less
zones then you will need the C100924 controller.

For 1 - 8 zones use the C100924 controller (1 controller per zone)

C100924 8 170mm
RGB & RGBW CONTROLLER 7 6 5
4
3
2
1 28.5mm
0
The C100924 is essential to complete any Collingwood Lighting colour change 58mm
installation. Receiving the signal from your remote control or device using
radio frequency (RF) makes this a fast, simple and flexible method of achieving
atmospheric lighting. By removing the need for complicated DMX systems,
multi zone colour change can be achieved. Use the C100924 for each zone up
to a maximum of 8. The C100924 works with both the PR3011 and the PR3002
power repeaters.

Don’t forget your 24V driver to power your controller

Now that you know how many power
repeaters you have in each zone you NUMBER OF WATTAGE PRODUCT (DRIVER)
will be able to use the table to work POWER REPEATERS DRIVER NEEDED
out which 24V driver you will need to
power your controller. 1-10 15W PS1524
If you are using more than 100 power
repeaters in a zone contact us for 11-30 50W PS5024
further help and information on
+44 (0) 1604 495 151.
31-60 100W PS10024

61-100 150W PSIP15024

PS1524 PS5024 PS10024 PSIP15024
15W driver 50W driver 100W driver 150W driver

368