Page 92 - liniLED-Catalogue-2019-EN

Symbols

MAC
Electro Static Discharge (ESD) sensitive device, apply standard ESD precautions when handling the product. ADAM2 The binning tolerance of this product is 2 MacAdam.
S D C M
CRI
Manufacturer’s declaration that the product meets the applicable EC directives. 80 + The CRI value of this product is 80 or higher.

F Only suitable for mounting on non-combustible surfaces. Protected against impact energy of 5 joules.
IK08

F Suitable for mounting on all surfaces. Protected against impact energy of 20 joules.
IK10
R
F Suitable for mounting on all surfaces and suitable to cover with insulating material. X mm Bending of the LED strip is possible with a radius of ≥ x millimetres in the specied direction.
BEND RADIUS

Passed glow wire test at 850 degrees Celsius. Global European regulations specify 650 degrees Celsius by default. Electrical appliance class I: exposed metal chassis is connected to electrical earth by a separate earth conductor.
GLOW WIRE
850 °C
Restriction of Hazardous Substances (RoHS): product complies with the RoHS directive and each homogeneous material does not exceed
RoHS the limits for the materials mentioned under the RoHS directive (Pb, Hg, Cd, Cr6+, PBB and PBDE). Electrical appliance class II: double insulated device, no connection to electrical earth required to reach electrical safety.

Low Smoke Halogen Free (LSHF): product emits low smoke and no halogen when exposed to high sources of heat. Electrical appliance class III: this product is designed to be supplied from an extra-low voltage (≤ 60.0 V DC or ≤ 42.4 V AC).
LSHF

Not protected against ingress of solid foreign objects. Not-protected against ingress of water. 24 Operating voltage of 24 V DC.
IP00 V DC

Protected against ingress of solid objects over 50 mm, e.g. accidental touch by persons hands, but no protection against deliberate contact SELV Separated or Safety Extra-Low Voltage (SELV): the secondary circuit of this product is designed so that under normal and single fault conditions
IP10 with a body part and no protection against liquids. equiv. (including earth fault in other circuits) the output will not exceed SELV safe level (60.0 V DC and 42.4 V AC).

Protected against ingress of solid foreign objects ≥ 12.5 millimetres. Not-protected against ingress of water. This product has been thoroughly tested for drive over applications.
IP20 DRIVE OVER

Protected against ingress of solid foreign objects ≥ 1.0 millimetres. Not-protected against ingress of water. This product has been tested for walkover applications.
IP40 WALK OVER

A I S I
This product can be both IP40 and IP65 depending on the conguration and application. See the documentation for the exact IP rating. Very high quality stainless steel type 316.
IP40/IP65 316

A I S I
This product can be both IP40 and IP68 depending on the conguration and application. See the documentation for the exact IP rating. Very high quality low carbon stainless steel type 316.
IP40/IP68 316L

Dust-tight, no ingress of dust. Protected against splashing water (Water splashed against the product from any direction). Product is resistant against ultraviolet (UV) light or sunlight. Non-UV resistant products can degrade or discolour fast when exposed to UV light.
IP64 UV

Dust-tight, no ingress of dust. Protected against water jets (Jet of 12.5 l/min at a distance of 2.5 metres from any direction). Product can be cleaned with normal cleaning agents as specied in the datasheet under ‘chemical compliances’.
IP65 CLEANING

This product can be stored and used below 0 degrees Celsius. Verify the minimum storage and operation temperature in the datasheet or manual
Dust-tight, no ingress of dust. Protected against powerful water jets (Powerful jets of 100 l/min at a distance of 2.5 metres from any direction).
IP66 FROST for the lowest temperature allowed.
Dust-tight, no ingress of dust. Protected against the eects of temporary immersion in water This product can be applied in seawater and its environment. Elements in seawater will have no harmful eect on the product.
IP67 (Immersion in water at a maximum depth of 1 metre up to an half hour). SEA For chemical specications see datasheet. Verify the IP rating for proper use.

Dust-tight, no ingress of dust. Protected against the eects of continuous immersion in water. This product can be applied inside swimming pool environments. Elements in the air will have no harmful eect on the product.
IP68 (immersion in water at a maximum depth of 2 metres unless specied otherwise). POOL CL For chemical specications of these elements see datasheet. Verify IP rating for proper use.

Dust-tight, no ingress of dust. Protected against the eects of continuous immersion in water This product is available on request and can be applied submerged in swimming pools and their environment. Disinfectants will have
IP68 + (immersion in water at a maximum depth of 50 metres). Only in combination with the liniLED® Mirror Welded Connector. POOL CL no harmful eect on the product. For chemical specications of these elements see datasheet. Verify IP rating for proper use.

Dust- tight, no ingress of dust. Protected against close-range high pressure, high temperature spray downs. 5 System guarantee of 5 years when the complete system consist of liniLED® products with the 5 years system warranty logo.
IP69K Only in combination with the liniLED® Mirror welded connector. System Terms & conditions apply.

92 For more information: www.liniLED.com. 93